Where Businesses Generate Aluminium Scrap and What Can Be Recycled

Where Businesses Generate Aluminium Scrap and What Can Be Recycled

Today5 min read

India depends on imports for more of its aluminium supply chain than most people notice, and the summer of 2026 made that visible on shop shelves, when Diet Coke became hard to find. After all, shipping disruptions linked to the Middle East conflict affected the supply of aluminium can sheet, which India largely imports. The same pressure reaches every factory and building site that produces aluminium scrap, because that scrap is raw material that mills and ingot makers need. Businesses that know where their aluminium scrap comes from, which types carry the best value, and how the aluminium scrap price per kg is formed are better positioned when they decide to recycle.

At MetalMandi, we are a digital scrap marketplace from Attero Recycling, and we are the direct buyer with no middlemen. Our app shows live prices and real-time price tracking, and we offer fair pricing, negotiation where applicable and fast payments to the 550+ vendors we work with, from small workshops to large industrial businesses.

Why Aluminium Scrap Is a Valuable Revenue Stream for Businesses

Demand for aluminium in India is set to grow quickly, with the Ministry of Mines projecting consumption of 8.5 million tonnes by FY2030 (up from 4.9 million tonnes in FY2024). At the same time, per capita use is about 3.4 kg, compared with a global average of 8-12 kg. India produced about 4.2 million tonnes of primary aluminium in FY2025, so a growing share of demand will have to be met by recycled metal and imports.

Aluminium scrap recycling is a steady revenue stream because it is produced continuously, in small amounts every day, by almost every kind of business. Secondary alloy ingots are typically priced below equivalent primary metal, which keeps recyclers eager to buy clean scrap and gives businesses a reason to treat it as an asset instead of a disposal problem. This is the commercial logic behind aluminium metal recycling in India.

Where Businesses Generate Aluminium Scrap

Aluminium scrap comes from six main sources, and each produces a different material with different contamination challenges. Knowing which one describes your business is the first step in preparing a lot that earns a fair rate.

Manufacturing and Fabrication Units (Offcuts, Turnings, Dross)

Fabrication units produce offcuts when profiles and sheets are cut to size, turnings and chips when parts are machined, and dross when metal is melted in furnaces. Turnings often carry cutting oil and should be drained and kept dry, while dross should be kept in its own lot because its aluminium content varies widely, from 10% to 90% depending on the grade.

Construction and Real Estate (Window Frames, Cladding, Sheets)

Renovation and demolition jobs release window frames, door sections, cladding panels, and roofing sheets in large, clean quantities. AL Circle describes clean sheet scrap from old siding, signage and cladding as Taint Tabor, a grade with lower iron content than mixed scrap, so removing glass, rubber gaskets and steel screws before collection helps these materials earn a higher grade.

Automotive and Engineering Workshops (Castings, Wheels, Radiators)

Workshops and dismantlers produce castings, alloy wheels, engine parts and radiators. Cast aluminium from engine blocks, transmission housings and wheels is called Tense or Tale, has a higher silicon content, and feeds the LM and ADC die-casting alloys used for new parts. Radiators often carry copper or brass tubes, so separate those before the lot is listed.

Electrical and Cable Industry (Wire, Busbars, Conductors)

Cable makers, panel builders and utilities generate wire, busbar ends, and conductor offcuts, and AL Circle reports that electrical and power transmission account for about 48% of domestic aluminium consumption. Aluminium wire is often traded as aluminium soft rassa (soft stranded wire) and aluminium hard rassa (hard stranded wire), and a conductor with a steel core must be separated because the steel lowers the grade.

Packaging, Food and Beverage Units (Cans, Foils, Trays)

Beverage plants, canteens, and food units produce cans, foils, and trays, and used beverage cans (UBC) have a uniform 3000 or 5000-series alloy that supports can-to-can recycling and packaging sheet. Foil and trays that carry food residue or laminated layers fetch less, so keep them clean and dry and separate them from rigid aluminium.

Offices, Hotels and Institutions (Fittings, Furniture, Utensils)

Offices, hotels, and institutions generate scrap during refurbishment, including partition frames, window grills, railings, furniture parts, and kitchen utensils. These pieces are usually fitted with steel screws, plastic caps, or rubber seals, so a quick stripping before collection can move the lot from a mixed grade to a clean one.

Aluminium Scrap Types and What Can Be Recycled

Aluminium scrap types are defined by form, alloy and cleanliness, and the four groups below cover most of what Indian businesses generate. Buyers price each group differently, so list each item under the group that best describes it.

Clean Sections and Extrusions

Sections and extrusions come from window and door frames, structural profiles and heat sinks, and they are the cleanest and most uniform aluminium scrap. Keep them free of glass, rubber, steel fasteners and heavy paint, and list them separately from cast material.

Cast Aluminium and Engine Parts

Cast aluminium includes engine parts, gearbox housings, pump bodies and wheels. It has more silicon and varies more in quality. Better sorting and pre-processing give recyclers more consistent chemistry from this material.

Aluminium Wire, Cable and Purja

Aluminium wire and cable scrap should be stripped of insulation where practical and separated from copper and steel cores. Purja (small parts and pieces) from old machines, motors and appliances is usually mixed in its composition, so it should be sorted by metal before listing.

Sheet, Foil and Utility Scrap

Sheet, foil, trays and household utility scrap vary widely in thickness and coating. Zorba as shredded mixed non-ferrous scrap that needs extensive sorting and refining and is harder to control for alloy chemistry, which is why unsorted mixed lots receive lower rates.

Aluminium Scrap Price in India: What Businesses Can Expect Per Kg

Searches for the aluminium scrap price today, or the aluminium scrap price today (US spelling), usually return a refined metal price, not a scrap quote. Cbonds recorded the MCX aluminium price at ₹341.7 a kg on 31 July 2026, and a public price tracker showed ₹330 a kg on 13 November 2026, with a range of ₹329 to ₹333 over the previous ten days.

An aluminium scrap price per kg is quoted below as a reference, and the size of the discount depends on type, alloy and contamination. Global conditions matter too: LME aluminium closed below US$3,000 a tonne for the first time in 2026 in mid-October, and BigMint's July assessment described weak, hand-to-mouth buying, with UK-origin zorba 95-5 scrap at US$2,700 a tonne CFR Nhava Sheva. The live rate in the app shows where your type stands on the day you list.

Aluminium Metal Recycling: What Happens After You List

After collection, aluminium scrap is sorted by type, melted in a furnace, cleaned of dross, adjusted to the target alloy and cast into ingots or billets. Each type feeds a different product, since Taint Tabor goes into packaging sheet, construction panels and roofing, Tense or Tale feeds die-casting alloys such as LM6, LM2/A380, LM24 and ADC, and used beverage cans go back into cans and packaging sheet.

This is why recyclers pay more for clean, sorted lots, since they produce predictable alloy chemistry and need less refining. Suppliers range from fully integrated, ISO-certified recyclers to informal re-melters running single furnaces without process controls. Hence, it helps to know which kind of buyer is receiving your material.

Common Queries From Businesses Recycling Aluminium Scrap

Why Quoted Rates Differ From Market Rates for Mixed Aluminium

Market rates describe a standard form of metal, whereas a quote for a mixed lot must allow for sorting, refining and the risk to alloy chemistry. Zorba-type material and heavily contaminated cast scrap need more work than clean sections, so the quoted rate sits further below the headline price.

GST Invoicing and Payment Terms for Businesses

Scrap attracts 18% GST, and the reverse charge mechanism introduced in October 2024 makes buyers liable for GST when the supplier is unregistered. GST-registered businesses share their GST number at KYC. Payment follows inspection and weighing, typically on the same business day.

Why Businesses Choose MetalMandi for Aluminium Scrap

Businesses often start by searching for aluminium scrap dealers nearby, and local dealers can be quick and fair, but a verbal rate cannot be verified later. With MetalMandi, you see the live rate before you list, deal with one direct buyer, negotiate where applicable and receive payment after inspection and weighing, with collection arranged and tracked in the app.

Aluminium scrap is generated in more places than most businesses track, including fabrication shops, building sites, workshops, cable plants, food units and offices. Knowing what you hold, keeping it free of steel, plastic, and oil, and checking the live rate before you list are the steps that decide whether the lot is priced as clean material or as a mixed pile.

FAQs

Where do businesses generate aluminium scrap?

Businesses generate aluminium scrap in fabrication and machining units, construction and renovation sites, automotive workshops, cable and electrical plants, packaging and food units, and offices or hotels. Each source produces different types, from clean sections to cast parts and wire, so sort them separately before listing.

What types of aluminium scrap can be recycled?

Clean sections and extrusions, cast aluminium and engine parts, aluminium wire and cable, sheet, foil and utility scrap, and purja (small parts) can all be recycled. Rates differ by type, alloy and cleanliness, so list each type separately with clear photographs.

Does aluminium scrap price differ for clean sections, cast scrap and wire?

Yes, because each type carries a different alloy, silicon content and level of contamination. Clean sections need little processing, cast scrap varies more in quality, and wire depends on whether insulation and steel cores are removed. Check the live aluminium scrap price per kg in the app before you list.

Do I need GST registration to recycle aluminium scrap as a business?

You complete a one-time KYC with an Aadhaar or PAN card, and GST-registered businesses also share their GST number. Since the tax treatment of scrap depends on your registration status, confirm your own position with your accountant before you list a lot.

Is there a minimum quantity for bulk aluminium scrap?

Minimum quantities can vary by material and location, so check the MetalMandi app or speak to our team for the current requirement for your type of aluminium scrap. Regular monthly lots from factories and workshops are welcome, and collection is arranged from your site.

Scrap Types & Materials